Detailed Product Description

non-clog high-efficiency submersible sewage pump --YW series

Instruction

YW high-efficiency non-clog submersible pump is a new product which is produce by our factory engineers and technicians who combine high technology of both here and abroad. This pump impeller adopts the domestic unique single channel structure, has merits of not fear stopping up, the energy conservation, reliable movement, and so on. And solute PN thick liquid cannot pump big pellet of heavy weight, as well as PW, the PWA slush pumps problem of easy the stops up.

this pump proof by the national measurement department and measure unit to be uses, shows each target achieved the overseas similar product the advanced level. It really is ideal equipment for pumping various professions attracts pulls out includes the pellet, the impurity, the textile fiber, the pulp liquid.

Using condition

The temperature of medium should be less than 70 degree.

The average weight of medium should not surpass 1500 kg/m3.

The mediums PH should between 5 and 9.

Installation and usage

First check if the outside fastening piece is become flexible during transit.

Check the electric power source to see if it is normal, safe, voltage is 380 V+5%, frequency is 50 HZ+1%.

Puts through the power source, tries to turn to see whether the impeller does defer to the direction extension which pumps instructed, if the direction reverses, exchanges electric cable in any two phase lines.

The corresponding pipe connects on the pump body bend. Then install the water pump well.